• YM-8806: Includes a set of enamel accessories specifically designed for compatibility with the YM-8806. Standard market accessories are not compatible.
• S32: Also comes with enamel accessories, which are compatible with standard designs available on the market.

• Disassemble Components: Remove all washable parts from the breast pump.
• Rinse: Wash the components under running water to clear any milk residue.
• Soak and Scrub: Immerse the parts in mild soapy water for 5 minutes, then gently scrub with a soft brush.
• Rinse Again: Rinse the parts thoroughly to remove any soap residue.
• Dry and Store: Allow the parts to air dry completely before reassembling or storing. Optionally, you can use a dishwasher or steam for disinfection, but avoid microwave ovens or ultraviolet cabinets to preserve the parts' durability.

• Suction modes and levels: YM-8806 features 4 modes and 12 levels; S32 has 4 modes and 9 levels.
• Portability and discretion: YM-8806 includes a storage bag for easy transportation. S32 operates quietly, making it suitable for discreet use, emphasizing privacy.

1. Check if the heated milk is refrigerated or bulk milk?
   How to solve: Please select the fast mode and set longer heating time. The heating time is longer, the warming time is shorter.
2. Check whether there is limescale on the heating plate of the milk warmer as it affects the heating effect.
   How to clean: Mix 100ml of purified water with 20ml of vinegar, then pour the mixture into a heating plate, soak it for an hour after boiled it, and then wipe it dry. Repeat this step if the removal is not completed.

This is the reminding tone that the heated liquid has reached the set temperature. In the fast warm milk mode, after the heating is completed, the warm steam in the warmer may cause overheating, so it needs to be taken out in time.

1. Check whether only the power indicator is flashing on the screen. After the milk warmer (24 hours)/heat food (2 hours)/sterilization (10 minutes) reaches the specified time, the milk warmer will enter the standby state.
   Solution: Press the switch key again, and then select the desired function.
   2. When the warm milk/heat food reaches the set temperature, it will stop heating, and use the residual temperature to warm up the liquid in the bottle.
   Solution: Check whether the corresponding function indicator light is displayed on the surface of the touch screen. If so, the milk warmer is working normally.

1. Please check whether the heating time set in the fast heating mode is too long.
   Solution: When choosing fast heating mode, please set a shorter heating time.
2. When you hear the”beep”sound of the heating completion, please take out the bottle in time.

1. Check whether the milk is refrigerated, whether the heating time is too short when using fast mode.
   Solution: When choosing to quickly warm milk, please set longer heating time.
2. After the quick heating milk is completed, it turns to warm milk. At this time, you need to add another 160ml of water to achieve the warm milk effect.
3. Check whetherIs the thermal conductivity of the container for milk is poor.
   Solution: Please replace the container of milk and heat it again.

• Higher Screen Temperature: The "water bath heating" mode displays the real-time water temperature, which is set higher initially to ensure the bottle reaches the desired temperature effectively.
• Overheating After Cycle: The temperature may continue to rise even after the heating cycle has ended, potentially causing overheating. It is advisable to remove the item immediately after heating to prevent this issue.

Boil the silicone bags in water for 2-3 minutes or use a steam bottle sterilizer for 2-3 minutes. Avoid using UV sterilizers as they may shorten the product's lifespan.

Our design, inspired by medical syringes, ensures stable, upright storage when inverted, making it hygienic, leak-proof, and convenient for feeding.

Yes, Nuliie's products are made from safe, non-toxic materials like BPA-free silicone and meet strict manufacturing standards.